Leapers 3-9x32 CQB Bug Buster Rifle Scope Rings & Sunshade - Quick Detach Mount

Description

Leapers UTG 3-9X32 1"  BugBuster Scope, Adjustable Objective,
Red
Green
Mil-dot, Quick Detach Rings, Screw in Sunshade, Lens Covers
Detail Information:
•
Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
•
1 Inch Tube with Emerald Coated Lens for Crystal Clear View with Maximum Light Transmission
•
Premium Zero Lockable and Zero Resettable Target Turrets with Consistent and Precise 1/4 MOA Per Click Adjustment
•
Range Estimating Mil-dot Reticle

for Optimal Aiming and Shooting Performance
•
Adjustable Objective from 3 Yards to Infinity to Achieve Parallax-free View
•
Red/Green Dual Illumination for Versatile Applications and Weather/Light Conditions
•
Large Field of View (Wide Angle) and Most Accommodating Eye Relief for Optimum Critical CQB Mission
•
Complete with 2" Sunshade, High Quality Flip-open Lens Caps and Quick-detachable Rings
Leapers/UTG started introducing mil-dot reticle optics from as early as 2003, pioneering the Range Estimating concept as a useful tool for hunters and shooters around the world. Today, mil-dot reticle is widely accepted and used in this industry. Leveraging our years of experience in this area, we developed and refined the unique Tactical Range Estimating(TRE) mil-dot reticle and offer this feature in almost all of our optics. With some patient learning and practice using our TRE, shooters can enhance accuracy and performance in ways not imagined before.
9 Dot TRE:
Regular mil-dot reticles found on the market usually have 4 dots in each direction of the cross hair, giving you 9 different aiming points for either windage or elevation. If you count the 2 inner tips of the opposite duplex cross hairs, you get 11 aiming points. Contrast with Leapers/UTG 36 Mil-Dot Tactical Range Estimating Reticle (TRE), which has 9 dots on each direction of the cross hair, giving you 19 aiming points or 21 including the inner tips of the duplex cross hairs.
6 Dot TRE:
For unique optical requirements, Leapers/UTG further created a new TRE variation. It has 6 dots on each direction of the cross hair, giving you 13 different aiming points for either windage or elevation. If you count the 2 inner tips of the opposite duplex cross hairs, you get 15 aiming points for estimation.
Mil-Dot Range Estimating:
Range estimating requires common knowledge/experience about your target's actual width or height.
Set your scope at 10X or the proper power, depending on the scope. View the target through the scope. Place the center of the dot against one edge of the target and measure to the opposite edge of the target.
Once the target has been measured in mils, depending on the scope model, a formula is available to estimate the distance of the target.
Each scope will come with a pre-calculated mil-dot table of most used distance estimates to aid the user.
Mil-Dot Range Estimating Example:
For example, based on past experiences, the length of a known animal from shoulder to tail is 40 inches (1.016 meters), and we see through a scope at, for example, 9X to find that the animal occupies 9 mils. Therefore, the distance can be derived from using the following formula -
Height or Width of Target in Meters x 1,000
Magnification
x
= Range in Meters (1 M = 1.0936 Yards)
Height or Width of Target in Mils
10
Hence, (1.016 x 1,000/9) X (9/10 ) = 101.6 meters (110 yds).
Armed with this knowledge, you can compensate for the bullet’s drop accordingly and make “great things happen”!
Magnification:
3 - 9X
Tube Diameter:
1 Inch
Objective Diameter:
32mm
Field of View @ 100 yards:
37.7' - 14'
Eye Relief:
4.2" - 3.2"
Exit Pupil:
10.6 - 3.6 mm
Click Value @100 yards:
1/4"
Length:
206mm
Weight:
13.9 oz
Parallax Setting:
3 Yds - Infinity
Batteries:
CR1620 3V